House wrap and moisture barrier sit behind your siding, quietly managing water and air. When it's installed properly, everything above it lasts longer.
Call 1 (833) 435-3949House wrap and moisture barrier installation covers the protective layer applied directly to the sheathing before any siding goes on. This layer manages two things at once: it keeps bulk water that gets past the siding from reaching the wood sheathing and framing, while still allowing water vapor from inside the wall to escape outward. Getting this balance right depends on using the correct product and installing it with proper overlaps and sealed seams.
This service is typically performed as part of a new installation or full replacement project, but it can also be addressed as a standalone service when existing siding needs to come off temporarily for another reason, or when a moisture barrier has failed and needs replacement without a full siding project.
A missing, damaged, or improperly installed moisture barrier is one of the most common reasons siding fails prematurely, even when the siding material itself is in good condition. Water that gets past the siding, whether through a seam, a nail hole, or simple wind-driven rain, has nowhere to go without a proper barrier, and ends up soaking into the sheathing and framing behind it.
This kind of hidden damage often goes unnoticed for a long time, since the siding on the surface can look completely fine while rot progresses underneath. By the time the problem becomes visible, whether through staining, a soft spot, or a musty smell, repairs frequently involve replacing framing in addition to siding.
The siding gets noticed. The barrier behind it is what actually keeps your walls dry.
When this service is part of a larger siding project, moisture barrier installation happens as a defined stage after old siding is removed and before new siding goes on, adding a specific step to the overall project timeline rather than a separate visit. When performed as a standalone service, the process is similar in scope but limited to the barrier itself, without the full siding installation that would normally follow.
Your technician will explain exactly where the barrier is being applied and how it integrates with existing elements like windows, doors, and any areas where new construction meets an existing structure.
In most cases, full siding removal is needed to properly access and replace the barrier underneath, since it sits directly against the sheathing beneath the siding.
Signs include staining on interior walls, a musty smell, or visible moisture damage discovered during a siding repair or inspection.
It's typically included as a stage in new installation or full replacement projects, though it can also be addressed on its own when circumstances call for it.
The terms are often used interchangeably. Both refer to the protective layer that manages water and air movement behind your siding, though specific products vary in their exact composition and performance characteristics.
Generally yes, since removing the old siding typically means the barrier underneath is disturbed and should be replaced to maintain proper protection.
As part of a larger project, it typically adds a day or so to the overall timeline, depending on the size of the house.
Yes, the materials used are backed by manufacturer warranties, and our installation labor is covered as well.
You are told clearly, and any necessary sheathing repair is completed before the moisture barrier and new siding are installed over it.
Our factory-certified technicians install house wrap and moisture barriers correctly on every Monrovia, MD project, protecting your home from the inside out.
Call 1 (833) 435-3949